Set Review - #40580-1: Blacktron Cruiser

Well, the LEGO Company got me again. I grew up as a space theme fan (M-Tron rocks!!!!) and was thrilled to see this set come back. I made sure I was right in line to pick up this January 2023 Gift with Purchase (GWP). This one contains 356 pieces and is no longer available from LEGO. At the time of this post, I do have one set available in the Bricks for Bricks Bricklink store if you are looking for one.

The packaging is similar to #21322-1 Pirates of Barracuda Bay and #10305-1: Lion Knights’ Castle. The throwback to the classic yellow packaging is fun to see. The front of the box shows the set with a space like print that we used to see in the old sets. The back gives some of the play functions of the set.

The set comes with six parts bags numbered one through three with two bags for each number. The instructions come in a lighter colored booklet which helps to see the dark pieces, and you get a small sticker sheet. While I’d prefer to have no stickers on any sets, I guess I can’t complain too much about the small sheet included here. Note, the picture has a brick separator from my collection. The set doesn’t come with one.

Here is the sticker sheet. Number two seems to show #10497-1: Galaxy Explorer on the display screen. If you don’t have the Galaxy Explorer, I will tell you that the Cruiser is not on the Galaxy Explorer screens.

The first bag builds the front crew compartment of the cruiser. There is a space for the minifigure and then a space to store a metal detector. The wings fold in and out for atmospheric travel I guess and there are two lasers/blasters on either side of the front of the cruiser.

The minifigure looks exactly like the Blacktron ones from back in the day. It’s cool to get another one in 2023 after not being able to get them since the 1990s. It comes with a metal detector that looks similar to the ones from the 90s, but it doesn’t have the open stud on the detector part.

Bag two builds another section of the cruiser that attaches to the first section with clips. This section is storage and comes with a container with a door and has space for the droid to hang out. On one of the doors is a camera/light or maybe a laser. The doors are held on with clips. They can open, but are a little fragile when you move them.

The third bag builds the back section of the cruiser with the solar panels on wings and a rocket motor. Similar to the last section, this section clips on the to the previous section. The wings are on clips so you can angle them as desired.

Here’s the final build. As a fan of the space themes in the 90s, I am glad I got this one. What a great modern day version. I never had any of the original Blacktron sets, but I did have a few of the minifigures from some of the minifigure packs. If you’re interested and didn’t get one as a GWP, definitely look around on Bricklink or eBay or other secondary marketplace sites.

And I almost forgot the droid. I’m not sure if it’s the same design as one from back in the day, but it fits right in.

As mentioned, I didn’t have any of the original Blacktron sets, but I did have Blacktron 2 or whatever the updated Blacktron theme was known as. So here’s the latest Blacktron Cruiser next to #6832: Super Nova II. It’s a smaller version of the Cruiser with the similar rear wings, engine in the back, a storage compartment, and crew compartment. The wings were a bit dusty so I tried to wash them off. They’re still a bit wet in the picture… sorry. I have a few more of the Blacktron 2 sets. At some point, I’ll pull them out, rebuild, and post about them.

Did anyone else have the Blacktron sets? Do you still have them?

Happy building!

LEGO In The News - The Wall Street Journal - The Economics of LEGO

This one was posted today and I figured I’d throw it out there as the rest of the fan media doesn’t seem to push these out. As a LEGO fan, I didn’t learn anything new from watching this that I didn’t already know, but it’s a good plug for people who aren’t already addicted to the brick.

It’s also fun to see some of the old commercials and ads. I wasn’t aware of the original Star Wars cartoon they mentioned. It’s just under six minutes long so check it out.

Happy building!

Set Review - #76403-1: The Ministry of Magic - Harry Potter

I’m still making my way through the 2022 Harry Potter sets. This one is #76403-1: The Ministry of Magic. It was released in the US on 20 June 2022 and contains 990 pieces. It retails for $99.99 in the US which works out to $0.101 per piece. I have yet to see this one go on sale, but I picked this one up before Christmas and got some of the deals being offered then (GWPs and double VIP points). We’ll have to see if this one goes on sale later in its shelf life as it is right on the 10 cents per piece mark and it would be great if it were lower. To be fair, you do get ten minifigures in this set which is a bonus.

The box looks pretty standard for a Harry Potter set. Full build on the front with standard logos. The back shows some play details and details of the build.

The set contains seven numbered parts bags, an instruction booklet, and some stickers.

My instructions came pre-folded so that was nice of them to pack them that way (or not). I do appreciate the lighter background on the instructions though. The sticker sheet isn’t too big and I managed to get them all on without wrecking any of them. I’m still not a fan of stickers, but I won’t complain much here.

The box shows that you build two “towers” or whatever they are called from the ministry. Bag one starts one of the towers with one floor. It builds the bottom floor which is part of the flue network. These are the fireplace looking areas where the wizards can transport in and out. The build has a mechanism so that you can rotate it to make it look like one of the minifigures transported into the ministry. I like the color of this build with the dark green, black, and gold. You get some good pieces here.

Bag one comes with two minifigures. Each one can be transformed into another if you rotate the head and put the other hair piece on. One is Mafalda Hopkirk who can become Hermione Granger and the other is Reg Cattermole who can become Ron Weasley. Hopefully you’ve seen the movie or read the book by now and you understand why the mnifigures were done this way.

The last part of this build is a phone booth. Another reference to the movie where Harry and Mr. Weasley use the phone booth as an elevator to enter into the ministry. It’s a pretty simple build and I like the printed window for the door.

Bag two builds the second layer of one of the towers and it nicely stacks on top of the first one. The outside is some windows separated by… I’m not sure what the pieces are called. They look like the playing pieces from the game “Battleship.” Anyways you stack them up and then place then between the windows to cover the gaps. On the inside of this section is a desk with some papers (tiles). This is a movie reference as well. The round plate with modified attachment is a bell I believe.

This build comes with Professor Dolores Umbridge who is holding the horcruxe and then Mary Cattermole who is on trial at the ministry. There is also a trans clear blue cat to represent Professor Umbridge’s patronous.

Bag three completes this tower with another level that looks similar to the previous level. The inside of this level is Professor Umbridge’s office which is pink like her outfit and full of cat decorations.

The minifigure is Albert Rumcon who turns into Harry Potter when you rotate the head and put the different hair piece on.

Bag four starts the second tower. The build is similar only this side has stacks of newspapers (printed tiles with textured bricks underneath). It also has a pipe that connects in the layer above. I’m not exactly sure what this is for.

This bag comes with a gold minifigure who is listed as the Ministry of Magic Statue. I don’t recall this from the movie, but it’s a little statue sitting in what I surmise is a pool of water.

The minifigure in this bag is Corban Yaxley. I recall the character from the movie, but I can’t tell you more about what he does or who he is. The minifigure looks pretty accurate compared to the movie character so no complaints there.

Bag five builds the second layer of this side of the tower. At this point, the build got repetitive and I hoped for something different. I understand why it was built this way as they want to reflect the scene in the movie, but having different tiles on the windows was about all that was different here. The inside is a bunch of… I’m not sure if this is the hall of memories that can be tipped over or what. The shelf rotates so they tip over like in the movie.

This bag comes with a Dementor minifigure.

Bag six tops off the second tower with a repeat of all the other sections. This one has an office. The minifigure in this bag is Arthur Weasley so maybe it’s his office? I’m not quite sure, but we do know he’s fascinated by muggles so the various muggle items in the office might mean it’s his space.

The last bag is number seven. It builds a connector between the two towers, tops off each tower, and adds some ministry logos. There’s also a small desk on top of this area which I don’t recall being there, but okay. There’s some trans clear green coming out of the top of each tower which is maybe from the flue network.

You build some interdepartmental mail which in the movie is letters that fly around. In brick version it’s LEGO triangles attached to clear antenna pieces held stationary by clear small radar dishes.

The minifigure in this bag is Pius Thicknesse. I failed my Harry Potter trivia quiz as I don’t know who he is or what he does in the movie.

10 minifigures in this set. I didn’t add the statue to the minifigure picture. If you’re a Harry Potter fan and collect the minifigures, you get some new ones in this set that haven’t been made before.

Here’s the final build and the insides of each side of the towers. Overall the build gets a bit repetitive, but you get some great pieces in good colors (especially if you like the dark green. There are a decent amount of gold pieces too. This set has a lot of random sections of the movie, but does not go into depth into one room or another. It would be a good set to start you on a MOC if you wanted to build out the ministry.

In terms of price, this one is on the border on being pricy. I definitely recommend waiting for a deal or maybe a sale near the end of it’s shelf life.

Overall, if you’re a Potter fan, you need to get this one to build up your minifigure collection and you’ll be pleased to build something outside of Hogwarts for once. If you’re not a Potter fan, this build might not thrill you with its repetitive sections. However you do get some good pieces for MOCs so no complaints there. What are your thoughts?

Happy building!

Set Review: #10305-1: Lion Knights' Castle - Icons

We haven’t had a castle in a while and thanks to the LEGO 90th anniversary and a fan vote, we get #10305-1: Lion Knights’ Castle. This set contains 4,514 pieces and retails in the US for $399.99. This works out to $0.089 per piece. The set was released on 26 July 2022 in the US and was announced at LEGOCon 2022. I ordered this one during a double VIP points period before Christmas 2022 and got a number of GWPs as well. I also used $200 in VIP points and a $50 gift card I received to help cut back on the cost.

This is a long review and I doubt many will make it all the way to the bottom so I’ll do the wrap up here. Overall, this was a great set. There were a lot of great building techniques and parts used and it was fun to build. I enjoyed seeing how the sections fit together and what little bits the designers threw in. There are also a lot of great minifigures to add into your collection which is awesome. It’s an expensive set and I’m not sure I would have purchased it without VIP points, a gift card, double VIP points, and GWPs. If you’re looking to buy this set, besides saving up for it, be sure to look for ways to maximize your purchase with GWPs, double VIP points, or other bonuses.

Here’s the box I received from LEGO Shop @ Home.

Here’s what it looks like when you open it up. The packaging is similar to how #42143-1: Ferrari Daytona SP3 was packaged with the set sandwiched between two thick pieces of cardboard.

Here’s what the box looks like. It’s got the old fashioned yellow coloring and the 90th anniversary logo. The front shows the full set while the back gives some details.

The sides of the box show a highlight of the anniversary and tribute to the castle theme, another view of the castle, and then the minifigures.

The set contents are some parts bags and then a box with more parts bags. Bag #26 for me was busted open. I was thankful that no parts were missing, but disappointed that this happened in a $400 set. Overall, there are 26 numbered bags (some have more than one bag per number) and an unnumbered bag. Also, the instructions are in a paperboard envelope for protection.

There are two instruction booklets. The instructions give some history of the castle theme and information on the designers. Also throughout the build, there are various notes written in an old English way talking about some of the various parts of the build.

I won’t go through each of the builds in detail, but will point out a few spots. Also, I built this set across different tables to include one that I brought outside (Florida was warm enough for outdoor building) so sorry for the different backgrounds.

Bag one builds a small market stand, a cart for the ox to pull, a beverage keg, and includes a farmer with a pitchfork.

Bag two builds the base of a section of the castle. This section is the start to a kitchen area and includes some food items.

The third bag finishes up the kitchen. It has a fireplace/oven, a water source, a large amount of utensils, and some supplies along with a cook.

The fourth bag adds another section which includes a Forestmen’s hide out area. There are some weapons, a map to the treasure, and a target. This section is accessed via a trap door in the castle on the floor above.

The fifth bag builds up the next floor with includes a fireplace and harpsicord It also has a trap door to the hide out.

The fifth bag builds up the walls. I like how they spaced in textured bricks with the regular smooth bricks. There are also some plants growing throughout and the angles fit in well. It’s great that they are not all 90 degree angles and they change throughout.

The sixth bag finishes up some of the wall section and a roof section. You get a chamber maid and a knight with a sword and shield.

The seventh bag starts up the mill section.

The eighth bag builds the mill. There’s a water wheel that spins and is connected with Technic parts to the mill area. Then you build out a section to dump the wheat into for it to fall into the grinding wheels. It’s a lot of detail for a small space. You also get a minifigure guard with helmet.

The ninth bag adds a banquet hall above the mill. This hall has a table with two chairs and then some shields on the wall with various prints (not stickers!!!!). The outside has some flowers for decorations and some plants growing up the side.

The tenth bag adds a play area for two kids. One has a Forestmen’s outfit and is holding a mini-minifigure. The other is wearing blue, but not in one of the normal uniforms from Castle. He is standing by a mini-model of the LEGO Castle #375 in my picture.

Bag 11 adds a bedroom area with a bed, small desk, rug, and a fireplace. It comes with a minifigure who has the Lion Knights’ uniform, but hair instead of a helmet. You can outfit him as a knight with some of the pieces from the armory. I didn’t picture it well here, but there’s a hidden door that opens when you open up the wall. Inside is a golden frog. I’m sure there’s a back story behind it, but it’s a fun detail to the set.

Bags 12 and 13 add in a thatched roof over the play and bedroom area. It also adds a tower for a look out to stand on. I like the piece use to make the roof look thatched.

Builds 14 and 15 build the next section of the castle. One fun part of the build was that I didn’t know what each section was as I was building it. I couldn’t tell at this point what exactly I was building. It made the builds more exciting. So don’t memorize any of the reviews you read/watch before building a set.

Build 16 puts together a wizard and a hidden treasure chest.

Bag 17 builds the dungeon with two cells and a poor skeleton minifigure inside one. It also comes with a Forestmen minifigure. There’s trap door so you can get in and out of this area. I posted pictures of the door open and closed.

Bags 18 and 19 build what ends up as an entry way through a ramp up to the castle and a connection to a draw bridge. More on that later. There’s a small armory inside with some helmets, weapons, and shields. You get another minifigure here.

Bag 20 builds the drawbridge, but you don’t make it functional until later. You add some plant growth around an archway and what ends up being a tree. I find it interesting that they chose black for the tree. Maybe it’s a specific kind? Or maybe they just thought black went better with the castle? I don’t know…

Bag 21…. I didn’t realize what this was until later on in the build…I also didn’t get a good picture of it (sorry). You build a castle bathroom here. That’s right! It’s a place for minifigures to use a medieval toilet. It’s pretty much a seat area with a hole that goes to the outside and then they have a stick for wiping I guess. And you’ll notice the chocolate frog on the ground outside. Yeah, it’s not a chocolate frog… unless that’s what comes out of minifigures. Hilarious!

You also build a door that can be raised/lowered using a textured 2x2 round brick on the outside. This blocks the entrance by the ramp when needed.

Bag 22 builds up more of the structure and adds to the armory. They apparently need a lot of weapons to defend this place.

Bag 23 continues to build this area up with some windows, a cheese slope awning over one of the windows, and arch window, and the armory.

Bag 24 builds up the tree outside. It also adds the mechanism to raise and lower the gate to the drawbridge. This is some interesting functionality as it can lock into place or be lowered quickly as needed. You also get the queen, a horse, and a knight. What’s fun about this set is you get a lot of female knight figures. It’s probably not historically accurate, but it’s a fun change to show a diverse castle populace.

Bag 25 adds some minifigures, tops off some of the towers and walls, and adds in some flags. I like the use of the rounded pieces for the tops of the towers. I’m not sure what we call these pieces, but they are fairly new to the LEGO system as I can recall.

Bag 26 builds up the ramp to get to the castle. It also adds some of the Black Falcon knights who look like they’ve journeyed to visit the castle. There is a knight of sorts on a horse, a guard on the ground, and then the poor minifigure with the huge pack to take care of the horse.

If you don’t like the minfigures in this set then you’re not into the castle theme. Ten Lion Knights (including the queen), 3 Black Falcons, 3 Forestmen, and 5 others to include the wizard. Oh and the skeleton that I forgot to include. Tack on 2 horses, an ox, a baby sheep, and a few birds, and you get a lot here. It’s a great selection!

Here’s the final set all assembled without minifigures from a few different angles. The first two pictures show the draw bridge up and then down. There are a couple of other views as well.

Bonus points if you’ve made it to the bottom of this pose. You can open up the castle for play purposes and to see inside into all of the different rooms. Having this option is nice as it’s more than just a model castle, but one that you can play with.

Thanks for reading if you made it this far. Happy building!

2023 - New Year and New Giving Campaign

Sorry, I’m a little late getting this one posted. We had a last minute pivot to give the Chalkguy LEGO Drive $460 in sets to get them started in 2023. To kick of 2023, we found a local group to support.

From 1 January to 30 June 2023, 15% of the profits from the Bricks for Bricks Bricklink store will go to the Ronald McDonald House of Northwest Florida. We have friends who have been grateful to use the Ronald McDonald House in the past and my family used to make meals at the Ronald McDonald house when we lived in Albuquerque, NM.

So thank you in advance for your purchases that will go to this great organization!

End of 2022 Campaign Results - A Change of Plan

16 Feb 23 update: It took a few weeks for me to post this, but the Chalk Guy crew took a picture for us to use on the site. It has their branding and some of the sets we sent their way. Thank you!

---

The good news is that we had $460 from the campaign at the end of 2022 to give from our Bricklink store sales. The plan was to give to Brick Dreams. We supported them before back in 2018 and their goal of giving foster kids bricks to play with while in transition. I reached out to them about sending them funds or LEGO bricks. Sadly, I didn’t hear back. Perhaps their organization no longer exists? Well I appreciate all they did in the past.

I searched for someone to replace Brick Dreams at the last minute. I made sure to pay attention to last post/update dates. It seems like there are numerous groups that used to collect and donate LEGO sets, but many of them are no longer active (the pandemic seems to have taken out a bunch). And then I found the Chalkguy LEGO Service Project.

Some background… This drive was started back in 2012 in Carmel, Indiana (near Indianapolis) by Ben Glenn. Ben was looking for a way to teach his daughters about giving and what started as a lesson turned into an ongoing project. They gave away two sets in 2012 and by 2019 they distributed 1,006 sets. In 2022 they gave away 514 sets. Well with our $460, we got them started off on the right foot with 12 brand new sets ranging from Star Wars to Speed Champions to Creator 3-in-1 to #10280-1: Flower Bouquet. Where do all of these sets go? Ben and team distribute them across his local area to various organizations trying to make life a little better for kids and their families.

If you live near Indianapolis or if you’d like to donate, you can find out how here.

Thanks to everyone who purchased from our Bricklink store in 2022. We look forward to giving more in 2023!

Happy building!

Set Review - #71037 - Series 24 - Collectible Minifigures

Yes, the LEGO Group has gotten me addicted to Collectible Minifigures. I didn’t participate in series one through nine as I thought they were ridiculous. Then on a whim I purchased a few from series 10 and I was hooked. Now it’s series 24 and here I am. This series was released in the US on 1 January 2023, but if you follow any of the online sites or feeds, many people found them in stores before then. They retail for $4.99 each and there are 12 minifigures total in this series. I ended up purchasing three of the boxes of six minifigures for a total of 18 minifigures. I assumed there would be a lot of doubles as always. My kiddos helped me open them up and assemble them and we were all shocked that we found all 12 minifigures within 18 random bags. WHAT!?!?!?!? Crazy!!!

I hope you have the same luck if you are a collector too.

Overall, I think this is a great series. I prefer the non-licensed ones and was glad to see another round of them come out. My thoughts on each one are below.

---

The Football Referee will be popular for fans of the Great Ball Contraption (GBC) as it comes with a LEGO soccer ball. I don’t know when the last time it was we got one of these in a set, but I expect it to show up in GBC displays over the next year.

The Conservationist has lots of great printing and molding and comes with a fun little koala. I like the addition to the LEGO animal kingdom.

---

I didn’t realize this was an Orc. I thought it was a alligator like creature. This is away from the type of builds I usually like, but it’s still not a bad figure. The shield is interesting with the new print on it.

The Robot Warrior has an interesting blaster/weapon made of minifigure roller skates. I like it. The helmet is fun too with the slot for the eyes to peak out underneath.

---

Newspaper Kid comes with a 2x2 printed tile of a newspaper, a sling shot to throw the paper, and a bag to hold papers. I’m not a huge fan of this minifigure, but I can see how it could be useful for someone trying to build an early 1900s MOC scene or maybe even Steam Punk themed builds.

The Rockin’ Horse Rider isn’t overly exciting other than you get a minifigure sized rocking horse that can actually rock back and forth. It also has a stud on the bottom so you can put it on the stand.

---

Series 22 had a Chili Pepper costume and Series 20 had a Pea Pod costume. Now we get a Carrot Mascot. I wonder which veggie we’ll get in Series 26? This one is fun and I like the Farmers Market sign to go with it.

Potter… no not Harry Potter. This one is an actual clay… I mean brick potter making a bowl. I like the do rag on the head.

---

Gotta love how LEGO keeps finding ways to bring back the Castle theme without bringing back the Castle theme. The Falconer gives everyone another Black Falcon minifigure. This one comes with a falcon and a bow and arrow.

The Rococo Aristocrat is interesting. Not my favorite character, but definitely something different and it comes with a small dog.

---

T-Rex Costume Fan could be a fun addition to a Jurassic Park MOC or maybe a Halloween MOC. It’s a neat costume that is different from what we’ve seen in the past.

Last, but certainly not least, the Brown Astronaut and Spacebaby. As a Space fan, this one is awesome. Besides the chance to add a brown minifigure to the classic space collection, the fact that you now get a baby too is just awesome. The miniature air tank and the little helmet. So cute! I expect this one to be popular based on how much I’ve seen it posted online.

---

Set Review: #76400-1 - Hogwarts Carriage and Thestrals - Harry Potter

I found set #76400-1: Hogwarts Carriage and Thestrals from the 2022 Harry Potter line on sale before Christmas. I finally got to assemble it so here’s a quick review. This set was released on 20 June 2022 in the US and retails for $19.99. It contains 121 pieces and works out to $0.165 per piece. It’s a bit high in my opinion. Especially for such a small set. I purchased it for $15.99 so slightly better. The Harry Potter theme always seems to have one or two sets a year at a lower price point so I think this is it for 2022.

Nothing special about the box. The front shows the full set with the Harry Potter logo and movie characters. The back shows the set again and some of the play features.

The contents are two parts bags and an instruction booklet. The instruction booklet is printed with a white background which makes it easier to see some of the darker pieces. I’m a fan of this switch.

And here’s the build! You get a carriage, a tree, two minifigures, and the two thestrals. You can’t expect a ton of details in such a small build, but it’s not too bad. Plus Harry Potter fans will get thestrals, yet another Harry Potter minifigure, and a Luna Lovegood minifigure. I can’t complain about this one considering the size of the set.

Overall, I wouldn’t grab this set unless you’re a Harry Potter fan or you’re looking for the thestrals for a MOC. It’s a good set if you want a lower price point option as a gift for a kid/adult, but it’s overpriced at $20. Look for it to go on sale or use it to get an order to pass a GWP limit.

Here’s a closer look at the minifigures. Both come with wands. Harry has an apple and Luna has a small purse and a 1x1 tile. I’m not sure what the tile is for… The set also has a printed 2x3 tile for the Quibbler newsletter that she reads in the movie/book.

The thestrals look pretty accurate. They don’t have moving parts except for the wings you attach to the adult. If you’re looking to build a Harry Potter MOC of a scene with them in it, then this is your chance to get these creatures. Beyond that, you’ll have to find other things to do with them.

Happy building!

Set Review - #10304-1: Chevrolet Camaro Z/28 - Icons

While some of the previous cars in the Creator Expert line turned Icons line seemed to have a lot of excitement, the Camaro seems to have been released and then it went quiet. I haven’t seen much about this one since it was released in the US on 26 July 2022. Part of the reason might be the pricing on this one. It retails for $169.99 in the US and contains 1,456 pieces. This works out to $0.117 per piece, which is a bit high. I took advantage of the Black Friday sale to spend 100 VIP points to get $30 off so I got it for $139.99 which brought it down to $0.096 per piece. I also grabbed a few GWPs so maybe that helped. Still it seems a bit pricy for an Icons set. I suspect that if LEGO put a discount on it this soon that it might not be selling real well. That’s just a guess on my part though.

The box shows the final set on the front with some brick red colored greebling on the bottom. It also has the Chevrolet logo. The back shows a picture of the actual vehicle and some of the customization options you can use when assembling the vehicle.

This set comes with eight numbered parts bags, a sticker sheet, and the instruction book. The instructions have some information about the vehicle and its history, information on the design team, and little tidbits about the set as you go through the build.

There aren’t a ton of stickers, but still, I’d prefer to not see stickers in an 18+ set.

The first bag assembles the bottom of the vehicle. I didn’t show the bottom in the picture, but it has a Technic base that you build upon which helps to keep it sturdy.

The second bag adds in more of the insides, some of the steering column, and the center console with the 1x1 printed tile with the number 5 on it for a nickel I guess.

The third bag adds some of the front bumper, the front axle attached to the steering column, and adds a few details to the engine area.

The fourth bag adds the doors. They swing open and closed pretty well. The mechanism to do it sticks into the seating area slightly and wouldn’t be ideal for actual passengers. The doors fit in pretty smoothly with the vehicle and there aren’t massive gaps which is good.

The fifth bag adds some detail to the engine area. I don’t know what an actual one looks like, but I guess it is realistic. You add in some larger pieces on each side of the engine which work well, but are on the verge of being BURP type pieces.

The sixth build adds in the front and back bumpers. This is where you can start to customize the build. I decided to go with the brick red stripe, but you have pieces to build each of the options shown (but only one option at a time). The instructions let you know you have options at first, but then you had to pay attention at a few steps to make sure you were doing the right version for the option you picked.

I think the designers did a good job capturing the angles for the bumpers. There are some small gaps, but overall it looks pretty good.

The back of the vehicle has some large ax pieces as one of the structures. I’m not sure what the specific detail is called nor do I know what set the huge ax piece is from, but I like the use of the piece and I think it fits there perfectly on either side of the license plate. You get two options for license plates. One is California and the other is Michigan. No options for Germany or outside the US like the Mustang or Porsche. Maybe that’s because this vehicle was only available in the US back when it was released by Chevrolet. I don’t know.

The seventh bag builds the front hood. No issues with the design here. It doesn’t open up very high due to the windshield, but it’s not a major limitation. You also build the bench seat in the back and the two seats in the front. I like the red stripe on the hood with the red seats. The steering wheel is a bit bigger than some of the previous vehicles. I’m not sure if it’s to scale or not, but it works okay for me.

Bag eight wraps up the set with the trunk, the rear window, and the roof (assuming you decide to build the set that way. My set didn’t have scratches on either of the windscreens. I’ve heard of a few folks complaining about this recently, but I haven’t seen it on any of the sets I’ve purchased with larger windows.

The hub caps are silver and you add another silver piece on top versus a Technic piece like you do with the Mustang and Porsche. I think this makes it look a bit more classy than the other two vehicles.

Overall, I enjoyed the build. It’s not super detailed, but I think there is enough detail considering the scale of the vehicle. I like that you have options for assembling the car and you can change it up as you want. As for downsides, the price obviously isn’t the best and when looking at the previous two vehicles, it does have some similarities which make you feel like you’re building the same car again. Unless you are a big fan of classic vehicles, I wouldn’t rush out to grab this one right away. Wait for a sale, double VIP points, a GWP, and/or some other bonus.

I still have #10295-1: Porsche 911 and #10265-1: Ford Mustang assembled and on display. They all look about the same size for length and width.

Here you can see the Technic piece that you put on the rim of the Mustang (left) which is the same for the Porsche versus the different piece of the Camaro. The Camaro also looks a little sleeker than the Mustang from that angle.

You can also see the wheels are different The Mustang (right) has thicker wheels which is the same as the Porsche (not pictured). The Camaro’s wheels are thinner. I have no idea if that is to scale or not. You can also notice the bottom of each vehicle, the lack of details (not surprising considering the scale), and the similar axles. The Mustang’s customization was related to making the car more of a hot rod versus changing color, which was okay with me.

Feel free to share your thoughts on the different vehicles in the comments below or send me a note at store@bricksforbricks.com. I’m curious to hear what you all think.

LEGO in the News - Wall Street Journal - Investing in LEGO is Booming?

I didn’t see this anywhere else in the LEGO Fan Media so I figured I’d publish this one. Apparently LEGO investing is where it’s at and you can make big money buying and selling it. If you watch this just under 6 minute video, you’ll see that you can make better returns than the stock market.

As someone with a Bricklink store, I can say sets and minifigures sell, but all of your sales are not what the video says. It takes work and time and not all sets have the huge returns that the videos spotlights. I can point out some of the sets that I have had for many years and they have not sold. My advice would be to be careful before jumping into “investing in LEGO.” Just because a bunch of folks on YouTube say you can make big money doesn’t mean that it’s going to be a huge cash cow. So be warned and enjoy this clip.