Are We Entering the Best Time of Year to Buy LEGO Sets?

I know what you’re thinking… there isn’t a bad time of year to buy the plastic brick. Well I’m coming at it from the pain to your wallet or credit card bill. I have an older post that I try to update when I get new information on how to find the best priced LEGO sets out there. Bricks can get expensive fast and looking for opportunities to get discounts can be a big win.

I’m writing this post in early October 2019. While it doesn’t seem like Christmas to me, the retailers are definitely thinking about Christmas. To them Christmas means selling a lot of stuff to include toys. A big seller on the toy list is the plastic brick (yeah, probably Mega Blocks too… AUGH!). A quick look at Brickset’s Amazon.com discount list (in the US) shows a whole bunch of sets already 30% off with some over 40% off. While these aren’t the big modular buildings or Creator Expert sets, there is a good variety of sets on the discount list. I expect this list to continue through November and December with changes here and there so give it a look every now and then to see if there’s something that you’ve been eyeing up.

In the past both Walmart and Amazon.com have done limited sales on some of the big sets. This has included some of the big Star Wars sets, Modular Buildings, Creator Expert sets, and some others. Keep your eyes open. Usually by the time big sales get posted on the LEGO Fan Media, the sales are over. Rumor has it that last year Walmart had a very short run discount on the UCS Millennium Falcon (#75192-1).

In the past, LEGO has looked to unload some of the sets it wants to retire around this time of year. It used to be that LEGO ran some big sales immediately after Christmas to unload sets. More recently, LEGO has unloaded sets over the Black Friday weekend with deals on Modulars, Creator Expert sets, and some others. Definitely check out your nearby LEGO Brand Store or LEGO Shop @ Home during that time period. Of course, LEGO will also release some new sets around this time of year for you to pick up and they will run some promotional sets too. There traditionally is a “free with purchase,” Christmas themed set or two that get released in the November/December time frame.

Formerly known as EBates, now Rakuten.com also increases money back deals leading up to Christmas. Last year LEGO Shop @ Home had 5% to 7.5% back during their Brick Friday to Cyber Monday deals. Walmart, Amazon.com, and others often do the same. If you are signed up for this program, take advantage of it..

The big retailers always change how they run sales and deals. Just because they did something in the past doesn’t guarantee that they will do it again the same way this year. So pay attention to the sales. Our friends in the LEGO Fan Media usually do a good job at updating us on upcoming sales and deals. There are many out there so pick your favorite. I look at The Brick Fan as it does a good job keeping up with current and upcoming sales.

I’m not an affiliate and I don’t get paid to advertise for all of these companies and sites. It’s up to you to pick where you want to spend your money. So happy hunting and happy building!

EDITORIAL: What Would You Say About a Set if LEGO Sent You it for Free?

I haven’t done this before so we’ll see how it goes… I’ve decided to write an editorial piece capturing an opinion that I’ve formed as of late after scouring the LEGO fan pages. Specifically, I’ve been following the recent release of the new UCS Imperial Star Destroyer Set (#75252-1). I had a blast building #75192-1: Millennium Falcon and news of the Imperial Star Destroyer set release caught my attention. Thankfully, the fan media has their set reviews ready to go soon after release. From the sites I look at, there were Imperial Star Destroyer reviews on Brickset.com, Eurobricks, and on YouTube, Beyond the Brick had a video review.

I’m trying to decide whether I want to save up my VIP points to buy a Star Destroyer set. The reviews have been helpful in pointing out things I wouldn’t even consider. They’ve highlighted the less than stellar minifigures included, the lack of internal designs unlike the Falcon, points where the design lacks detail, and the mere challenge of trying to display a model this large somewhere. They’ve also highlighted the positives like the cool “greebling,” the built in carrying handle, the intricacy of the various angles formed, and some of the many cool details. To be honest, I have not decided one way or another whether I want to take the plunge or not.

Onto the meat of the discussion… I am glad LEGO sends out free copies of the sets to various LEGO fan media influencers. It works out great for them to get reviews published right as a set releases for sale so the rest of the fan community can get an inside look at the set. It’s a smart move on LEGO’s part and they probably see more benefits by giving away a bunch of sets for free than they do by giving up sets. Also to be fair, all of the reviewers acknowledge that they have received a free copy. For example, Brickset says “This set was provided for review by The LEGO Group but the review is an expression of my own opinions.” But are we in the fan community getting true reviews? Many of the reviews have a comment about the set being expensive, but it seems like it’s worth it to buy. However, they didn’t actually buy it. How can they make an assessment like that? I almost feel like I need to wait and find someone who as actually spent their hard earned cash to buy this before I accept any decisions on price. Don’t get me wrong, I would love it if LEGO sent me free sets to review (hint, hint… if someone from LEGO is reading this…), but I don’t think I could make a fair assessment on the price LEGO picked for a set without actually paying for a set. Often times, that’s why my reviews are much later as I tend to wait for sets to go on sale before buying them.

I don’t mean to stir up discontent among the community. I think LEGO is doing a great thing by sending sets to the community to review. I appreciate and thank the fan media for taking the time to create videos, post professional quality photos, and assess sets from the prospective of a fan builder. My recommendation going forward is to continue with this process. I would also suggest that we as a fan look into finding ways to assess the price that are more objective. We have the somewhat meaningful price per brick. I have seen price per pound used as well. The Star Destroyer is also compared in price to the Falcon which I’m not sure is 100% accurate either. What else is there? Any ideas on how to make this process more transparent?

Thanks for hearing me out. Happy building!

German Bricks - Zusammengebaut.com

If you’re like me and you keep up with LEGO via fan websites, then you are probably familiar with some of the big names out there like Brickset.com, The BrickBlogger, The Brothers Brick, The Brick Fan, and others. These are all fan sites from the US or UK, but what about elsewhere? Recently I stumbled across a YouTube channel called “Assembled.” The channel is run by Germans based in Hamburg (northern Germany) and all of the videos are in English. What sets the channel apart from others? Well for one, Hamburg, Germany is about a 3 hour drive from Billund, Denmark. Assembled has a lot of content from Billund. For example, they were at LEGO Fan Media days 2019 and got to do interviews with set designers on some of the new sets that have been showing up (to include many with Jamie Berard). Here are a few:

Interview with LEGO Creator Expert Design Lead Jamie Berard at LEGO House: Presentation of the LEGO Creator Expert 10267 Gingerbread House | LEGO Fan Media Days 2019

Interview with LEGO Ideas Design Lead Samuel Johnson, Head of Marketing Monica Pedersen and Designer Cesar Carvalhosa Soares at LEGO House: Presentation of the LEGO Ideas Tree House 21318

LEGO Star Wars Boost Droid Commander 75253: Interview with LEGO Designer Steve Geist at LEGO House | LEGO Fan Media Days 2019

They even have some interviews with LEGO CEO Niels B. Christiansen.

February 2019

March 2018

From the YouTube page, I found their website/blog titled Zusammengebaut.com. Using the handy translate function on Google Chrome, it turns out that it translates to “Assembled.” I rely on the translate function to get me through so don’t feel bad if you do the same thing…

You can check out the About page here. It explains what they are and who they are. Andres Lehmann is the face of the YouTube channel and if you check out their videos you’ll see him in a few with the Beyond the Brick crew. They list another five team members and provide some information on them as well.

With a base in Germany, they present some more localized news. The most recent being a stop to the “Rebuild the World” kickoff in Berlin.

So if you’re an American or from the English speaking world, here’s a good chance to see what is going on in another part of the LEGO fan world. Definitely take the time to check out their site.

Happy building!

Set Review - #10265-1: Ford Mustang - Creator Expert

If you’ve been paying attention, #10265-1: Ford Mustang has been out in the US since 1 March 2019. I just got it and built it recently. I caught it on a double VIP point period so I paid the full $149.99 price, but got the added bonus of more VIP points. It has 1,471 pieces which works out to $0.102 per piece.

There are a lot of Blogs, YouTube channels, and other social media sites that race to be the first to review a set. Sites like the BrickBlogger claim to not be the first, but to be the most thorough. My goal is to do neither. I want to review sets where I have found a way to get them at a discount or to take advantage of some sort of deal like double VIP points or special edition free offers. That’s why this review is coming out over six months after the set was released in the US.

Onto the review…

The front of the box shows a picture of the car with its non-customized build. The set is listed for ages 16 and up and the Ford Mustang logo is there as well. The back shows the model with some of its customized options installed as well as some of the movable/removable parts.

The set contains 6 sets of parts bags. Some have 2 bags per number while some have one. There’s also an instruction book that is wrapped in plastic along with a sticker sheet. Thankfully, the stickers are mainly license plates. There are only 6 that go on the actual model.

Similar to #10266-1: NASA Apollo Lunar Lander, the instruction book contains information about the set. This one gives some background on the Ford Mustang (in English, French, and Spanish) and then gives facts throughout the build on the various pages. The picture below is one of the information pages at the beginning with a bright red Mustang pictured.

The first bag includes a piece separator as many of the larger sets do. The initial build is the main frame and base of the car. There are a good number of Technic pieces used to build the axles, steering, and the lift function that we will see later.

The second set of bags includes the start of the front fender/bumper, some of the engine, the steering column and wheel, some of the interior to include the gear shift, and the rear axle. Of note, the steering column actually turns the wheels, the wheels spin, the rear wheels can be raised or lowered, but the shifter does not actually change anything. It moves, but is not connected with the rest of the car like #42083-1: Bugatti Chiron.

The third set of bags includes the seats, some of the side paneling, part of the doors, and some of the structure that will support various parts of the car added later. Both seats are the same design and have good use of SNOT techniques.

The fourth set of bags adds the front and rear windshield, the frame to hold the roof and trunk, the side paneling in the back, and the rear bumper to include the brake lights and the Mustang logo. I added a few other pictures so you could get a look at the other sides of the car.

I’m a failure of a blogger or maybe I was just too into the build, but I skipped taking pictures after the fifth set of bags were added to the build. I’ll go with being too into the build. Sorry…

This section adds the front bumper, headlights, front grill, front side body, remainder of engine, and remainder of doors (top and mirrors).

The last set of bags adds the hood, roof, trunk, and wheels. I like the white stripes going across the vehicle. I think it is a nice touch versus just using one color for the whole vehicle. It also has the license plates and then the custom pieces.

This car has a number of movable parts to include the hood, both doors, the trunk, steering wheel and front wheels, and the roof can be removed. This adds to the play factor, gives you some more options for display, and adds a bit of realism to the model.

I have yet to decide which plates I would like to use. You get 5 options. In the picture below, I believe the ones on the top left are Australian. The bottom left are UK plates (fun fact, the one plate is yellow so they can better take a picture of your plate with speed cameras at night). The 2 sets of plates in the center are both from the US with the top being from Michigan and the bottom from California. The plates on the right appear to be from Germany (the one with the 2 round logos goes on the back… that’s your registration).

The inside has a steering wheel and 2 dials on the driver’s side. There’s a radio in the center along with the shifter. The passenger doesn’t get any fun details. Not pictured, but one of the stickers is a rear view mirror with a car in view. I think the car has the right amount of internal details without over doing it or making the model too large and the price too high.

The instruction book talks about how the Mustang was made to be customized. The instructions list six different ways to customize this set. The first is the adjustable rear suspension. I don’t have it pictured, but underneath the back of the car is a piece that you can spin to raise or lower the back of the car. Next is the “shorty exhaust headers” on either side of the car. I have the driver’s side set pictured below. The next two are the “supercharger with scoop intake” and “front splitter” that I have shown in the same picture. Finally, there is the “real spoiler” and then the “nitrous oxide tank” in the trunk. You can choose to put some, none, or all of these options into the model. The build is made in such a way that you aren’t prevented from doing any of them. There are minimal pieces to remove in order to add the customized options in. Between these features and the different license plates, this is a pretty cool option to have with the car.

Supercharger with Scoop Intake
Front Splitter

Rear Spoiler

Shorty Exhaust Headers

Nitrous Oxide Tank

Overall, I’m a fan of this set. If you have read some of my past reviews, I talk about the combination of System and Technic pieces in a build. I am personally not good at combining the two, but I enjoy building using both. Having the functionality offered by Technic and the detail that comes with System is awesome and this set gives you that. Unlike the Technic cars, this one is more detail than functionality, but I think LEGO achieved a good balance between detail and functionality in this set.

The price is on the borderline of being a bit high. The Creator Expert sets don’t often go on sale and usually they don’t until their end of life. Getting a discount now will most likely involve using VIP points or catching some other sale. If you find it cheaper or use some other method to get a discount, let me know in the comments below.

What are your thoughts on this set?

Happy building!

LEGO Architecture in the News

Lego architects and super-fans on designing perfect miniature worlds

Published 27th August 2019 Written by Matthew Ponsford, CNN

A quick post this week… I found this article published on CNN.com which talks about LEGO and Architecture (click on the link above to read the article). It covers everything from the Architecture set line, to fan builds, to some projects people have undertaken in a larger scale. I would like a truck full of bricks on 2 tables to start building.

It’s a quick read with some good pictures so definitely check it out!

Is This The Train We're Looking For?

If you’ve looked at my blog, you’ll see that I don’t post on the latest and greatest sets out. I also don’t rush to get new sets or get sets shipped to me for reviews. I tend to look for sales or opportunities to get an expensive set with a deal like coming with a free set or Double VIP points. With that being said, I’m a big fan of LEGO trains and I miss some of the Creator Expert like trains that were released over the past 10 years or so. I’d like to see more train related sets come out and I’ve advocated for using the Ideas system to do that here and here.

There is a reason why we haven’t seen more Creator Expert like trains. An interview with LEGO Designer Jamie Berard, he discusses how LEGO doesn’t make the money they want on Creator Expert trains. He mentions how they try and fit the train theme in on other themes. We’ve seen it with Harry Potter, CITY, Hidden Side and now Disney. The goal is to get fans interested in another theme to get a train versus targeting train fans.

So #71044-1: Disney Train and Station was released to VIPs on 21 August 2019 and I believe 1 September 2019 is the release date to everyone else (in the US). The set is $329.99 and is 2,925 pieces ($0.113/piece). It includes a train, a station, 5 minifigures, 16 curved pieces of track and 4 straight pieces of track.. The set comes with motorized functions via the Powered Up app. There are lots of reviews on sites and YouTube so if you want more, check them out.

Enough about that… this is not a review and I have not bought the set. The real question is, does this train fulfill the need for a Creator Expert like train? It has close to 3,000 pieces, it looks to have a lot of detail on the train and station which is good. I have yet to build it so I can’t say anything about the building techniques, but it does not look like it is just stacking bricks one on top of the other. From an initial look, it seems pretty positive.

From a train fan perspective, I’m not sure if this is what I’m looking for. It is a great set to go around your Disney park, your castle, to go around with your minifigures, and to proclaim the greatness of Disney. It is not something that is going to roll through a train station next to the Horizon Express or the Emerald Night. It doesn’t seem to go with those sets. I’ve seen a few videos out there where people have had this train run by the Disney Castle and the Creator Expert fairground sets. So maybe if you’re going to make a theme park display, this one would fit in.

I have mixed feelings about this set and I’m not sure it is worth buying or spending my VIP points on. What are your thoughts?

Set Review - #80103-1: Dragon Boat Race

If you actively track the LEGO world, then you might be familiar with this set and how it came to be. If not, here’s the short history. LEGO released #80101-1: Chinese New Year’s Eve Dinner, then #80102-1: Dragon Dance, and then this set #80103-1:Dragon Boat Race in 2019. These sets were only available for purchase in the Asia Pacific region of the world. These sets along with a few others that had various exclusivity tie ins, like only available at Target or Walmart, caused a lot of fans of the brick to be upset that they missed out or to pay a lot on the secondary market. LEGO listened and set a date where they would offer exclusive sets for a 3-6 month period everywhere after the initial run at the region intended.

The first set to be released everywhere (to my knowledge) is #80103-1: Dragon Boat Race. It was released on 1 July 2019 in the US. The cost is $49.99 for 643 pieces and 15 minifigures. It works out to $0.078/piece which is pretty good if you ask me.

The front of the box shows the full set. In the upper right corner is a logo with some characters that I am unable to read. In English on the logo it says “The Dragon Boat Festival” and “Chinese Festival Special Edition.” Like most sets, the back shows the various features of the set and that the boats have wheels so you can push them on a floor or table.

The contents are 5 parts bags, a sticker sheet (which got folded up in the box), and an instruction book.

The first bag starts off with the red boat and 4 minifigures. The boat is pretty simple to build and there are stickers along the edges that my picture doesn’t capture. There is also a course marker in the form of a flag for the water. The minifigures are all in similar uniforms and a few have 2 facial expressions.

Bag 2 finishes off the red boat with the dragon face and the tail. It also adds the drummer to help the rowers keep pace. I really like how the designers made the cranium and tail of the dragon. The piece usage is pretty simple, but very clever. My favorite is the red croissant piece on the nose.

Additionally, this bag comes with part of the dock which has a noodle seller and a potential buyer/dragon boat race spectator. The stickers for the decorations really add to the set in my opinion and there are some cheese slopes with printed noodles on them.

And yes, I forgot to add on the bar across the front until after I took the picture (in case you were looking that close).

The third bag starts the green boat. The build is very similar to the red boat and the 4 rowers are included in this bag. The minifigures have orange torsos and white pants. Similar to the other boat crew only a few have dual faces.

Bag 4 completes the dragon boat and includes the drummer to keep the pace. The dragon’s head is just as clever as the red boat. I like how the minifigure flippers are ears and the telephone piece help make the nostrils.

This bag also includes an addition to the dock area started in bag 2. There’s a viewing area with 2 minifigures. The minifigures have flags to wave and one got some noodles to eat while watching. The dock doesn’t have much to it in terms of design and there are steps that will go to the stand in bag 5.

Bag 5 finishes the build with the construction of a viewing stand where we assume the race judge minifigure views the race. He also keeps track of the trophy for the winners. The stand has some great details to help it fit the culture. The brick design on the top with brick hot dogs is actually a pretty cool design. The flags in front with the stickers showing two dragons racing is also a cool design. That’s right, I just said stickers were good.

Below the dock in the water is some plant life and a frog hanging out. The water is created with clear tiles on top of blue plates

Here’s the whole set once you are done. There are some mixed reviews out there, but personally I am positive on this set. It is something different and opens up a whole new realm of possibility for LEGO. To have cultural builds and to sell them everywhere could help expose the rest of the world to new things. The age range is listed as 8+. If a kid builds this, they may want to know more about that culture and what is being presented. It could be an opportunity to do some internet searches and show what it is all about. When I lived in Alabama, they actually had an annual dragon boat race so maybe there is something nearby that you can go see.

The set price and price per brick isn’t too bad and the assortment of pieces is actually pretty decent. Plus the amount of minifigures you get in this set is a bonus. I’m a fan overall and I look forward to seeing how people add this set to their CITY scenes.

What other cultural builds should LEGO take on?

Happy building!

Set Review - #BL19003: Skyline Express - BrickLink AFOL Designer Program

I reviewed the first set I received (Bikes!) from the BrickLink AFOL Designer Program here. This is the second one that I ordered. It is BL19003: Skyline Express. It arrived similar to the first one in a box with the BrickLink logo on it. The first picture is the outer box. Inside that box was the second box. I was glad to see it was well protected.

Here’s the set. It was $139.99 for 1,365 pieces. That works out to $0.103 per piece. The front of the box shows the set, the BrickLink logo, the 60th anniversary logo, and the hand written set number (#981). The back shows the opposite side of the set.

The other picture I posted shows that the set designer uses the name jazlecraz and he’s from Australia.

Much like the last set, this set has a cover on the box that comes off. The inside of the box cover is a printed photo that can be used as a background for the set. This one is of Sydney, Australia.

The box inside the cover is similar to the last set. It’s a black box. The top has the word “BrickLink” and the back has information about the AFOL Designer Program.

Much like the last set, there’s a seal on the box. When you open the seal, it says “void.” So if you’re planning to hold onto it or re-sell it, definitely don’t mess with that sticker. The inside looks like it was packed by hand with a card on top that has a “thank you” from LEGO and BrickLink.

The contents were 15 parts bags numbered one through four. There is a 16th bag with the special anniversary brick. There are 2 dark tan 16x16 plates as well. There is also the instruction booklet and the card which shows all of the sets on the opposite side of the “thank" you.”

In the instruction book is a note from Jared Le Cres, the designer of the set. He mentions that he has a video that shows how to install a motor into the train. You can watch the video here. It’s not a smooth integration. You need to buy a bunch of parts if you don’t already have them on hand and you obviously need a motor and battery box. The design itself looks a bit bulky too as the motor pops out of one of the cars. To top it off, you need to raise the roof of the station to make sure the train fits. As I haven’t tried to motorize it myself, I won’t complain or be negative. Just a word of warning if you want to follow the designer’s plan.

Additionally, inside the instruction booklet is a quick write up on the set.

The first set of bags starts the station. build From left to right there are stairs going to the upper level, ticket machines and a schedule board, and then a Juice bar titled “Jüs.” I can’t say I have seen those stairs before, but they are an interesting piece. In a lot of the modular builds, they build curving stairs with bricks so this is a first. Maybe it is from a Friend’s set? The Juice Bar is pretty simple, but it fits right into the scene with some stools to sit on and a wide counter.

The supports for the upper level are not the sturdiest things, but then again it is an AFOL set. They get the job done, but LEGO would have made them stronger. I had no problems with them, but it made it a challenge when I went to transport it around.

The second set of bags finishes the upper floor. There is another set of stairs to get all the way to the top platform. Then there’s another schedule screen and some seats for minifigures to use while waiting for trains. With the station complete the use of colors hits you. The juice bar really stands out with its orange and the blue also contrasts with the white. If I were to put this in a large CITY scene, I would want this by some more modern buildings or maybe skyscrapers. The top is finished off with a small roof made of trans blue clear windows to let in light.

The juice bar also has some glasses, brick fruit, and some bowls. Forgot to mention that previously.

The third set of bags is the track. The track is all raised and it is held up by supports connected on the bottom with white plates used in the collectible minifigure sets. There is a good mix of straight and curved pieces and you can adjust the track a bit or buy other sets with track to expand what you have. I have not tried to motorize the train yet, but from what I’ve been told it is a challenge to have it go up hill so you’ll have to stick to the flat track for now until a better solution is found.

The last portion is the train and minifigures. I’ll get to the minifigures in a bit, but the train to me is a little weak. While the minifigures can fit inside, there are no seats or doors. You have to take the cars apart if you want to put minifigures in or out. I think I will look to modify the train at some point in the future.

I also found that it derails rather easily when I try to move it along the track. Maybe it will do better when it has its own motor. We’ll see I guess. For now, it slips often when I pull or push it.

The set comes with six minifigures. There is a good variety in my opinion. I like the differing torsos and there is even an extra hair piece. I also like that there’s a female minifigure with a ball cap on. I don’t think that is seen often, but maybe I’m missing something. It’s a good selection of minifigures. Well done!

The train wasn’t enough to curb my enthusiasm for this set. I’m a big fan of what the designer did and while LEGO will probably never bring back the original monorail, this type of monorail works for me. It’s a bit pricey, but if you consider that the track and supports are probably a bit more expensive, that’s most likely where it came from. I look forward to adding this set to my CITY sometime in the future and hopefully motorizing and adding some track on.

Has anyone motorized a train like this yet? Any thoughts on how it works?

In the meantime, happy building!

Set Review - #4000026-1: LEGO House Tree of Creativity

Here’s the final review of the LEGO® House sets. There was #21037: LEGO® House and #40366-1: LEGO® House Dinosaurs. Now there’s #4000026-1: LEGO® House Tree of Creativity. These three sets are only available at the LEGO® Brand Store in the LEGO® House in Billund, Denmark. This set was released in 2018. I couldn’t find the exact date and I’m not sure how long it will be out.

The set contains 837 pieces and is priced at 599 DKK. The day I went, the exchange rate made it $89.63 total. That’s $0.107 per piece so a bit on the high end in my opinion. Keep in mind that the price includes 25% Value Added Tax (think sales tax in the US) so if you buy it with the VAT form that you can take to the airport then it will be cheaper. I didn’t have that option since I was just driving back to Germany so I ate the tax.

Keep in mind when you go that there is a limit of three per family. As mentioned in other reviews, I didn’t try and play any games and have my NLS buy some too. I did have a car so it made bringing back the extra sets much easier than trying to get them on a plane or shipping them back to the US.

Onto the review…

The box is not a normal size that I recognize from other sets. Or maybe it is and I just can’t tell the difference. The front shows the set with the minifigure included nearby. The back gives some information on the LEGO House and the actual Tree of Creativity. I also included a picture from the side of the box of the LEGO® House logo and then some stats on the actual model.

The set comes with six parts bags that are not numbered and includes a piece separator. The instructions are not wrapped, but they were not jammed in the box. No stickers!

The build doesn’t have any natural break points where you open new bags or switch to a new instruction book so I just took pictures as I went. The build starts off with the base of the tree. The actual base is a 3 foot high or so barrier and the bottom is filled with various green parts. Obviously the trunk of the tree starts there too.

The tree is built around a square pattern with various pieces thrown in to mix up the shape and made it non-uniform. The middle of the trunk is filled with two Technic parts that hook in throughout the tree with pins. This occurs throughout the build as you’ll see and helps to make it more structurally sound. On the actual tree trunk are various designs. The set has the wooden duck toy built in similar to how the actual tree has the wooden duck built in.

Continuing on is the first branch with a castle on it to represent the castle theme. You can also see the Technic parts continuing their journey upwards.

Continuing on with the trunk rising up around the Technic parts. Another branch is added with a fire truck resting on it.

As the build continues, there is a branch with a train, a train station, and a building. The train is one of the larger mini-builds on top of a branch. A few of the branches are added on without any items on top. If you go to the actual Tree of Creativity, you can see that the LEGO® House builds new things across time to remain permanent or to just be part time additions. During my trip, there were some monkeys hanging out on the various branches.

Instruction #162… this includes a branch with a rocket on top. Up to #192 includes some branches with nothing on top and a branch with a bulldozer on it.

Topping off the build is a crane with a new part of the tree to attach. The tree is meant to be a story of the LEGO® Company’s journey and the crane shows how it will continue to grow. It will be interesting to see if over the years they add new branches and new sections.

This set comes with one minifigure. It’s a male minifigure with blond-ish colored hair in a LEGO® House shirt. The LEGO® Store there has other figures with this shirt, but they all appear to be key chains. So unless there is another way, this is your only option to get one like this. In my opinion, it would be nice to build your own figure with the shirt or if the set had multiple versions and you could pick which one you wanted based on the minifigure it had. That would probably be harder to produce so I’m sure the set would be more expensive it they did that.

A few extra items that I haven’t highlighted… on one side of the tree is a brick built wood pecker. Considering the scale, I think the designers did a good job capturing a bird.

Also, I included another shot so you can get a closer look at the train station, rocket, and bulldozer.

We’ve reached the end of the build. Overall, it’s a good set and captures the real model pretty accurately. The build uses some good techniques and there are some decent pieces in the set. In my opinion though, I would pick one of the other LEGO® House exclusive sets over this one if I was limited in luggage space or funds. The other 2 are better display pieces. This one doesn’t fit as much as it looks weird as a stand alone tree. The actual tree in the building fits the architecture right by the stairwell. It doesn’t look as thin because it is surrounded by the stairs and then approaches the top of the building. Additionally, it is a bit pricey for what you get. ~$90 for 837 pieces and the pieces aren’t all that big. As a collector, I’m glad I got it, but that’s really the only audience it applies to. What are your thoughts?

Want to Create Your Own Brick Based YouTube Channel?

Maybe I’m the minority, but I don’t watch a lot of TV anymore. I also don’t have Netflix or any other kind of streaming service so that probably puts me deep into the minority. Usually when I watch things, it is on YouTube. Back in the day, the content was pretty awful, but today there are a lot of folks out there putting a lot of effort into making some great content. That includes all of our brick based friends. A few months back, I highlighted Beyond the Brick and the great work that team is doing to put out some LEGO related content. Well the team there recently celebrated reaching over 500,000 subscribers. They did a number of videos to celebrate the milestone. One in particular that interested me talked a lot about the business aspects of their channel.

I linked it below… What an attention grabbing title though, right? How much money do they make? I won’t spoil it for you, but John Hanlon goes through their YouTube stats to show how many visitors they get and shows you the top videos they have for making money. I appreciate his honest and open opinions about what they are doing and what he still isn’t sure about yet. If you are thinking about setting up a brick based YouTube channel, definitely find 30 minutes to watch this video. Bring a pad of paper and a pen to take notes as he gives some good points. Some key points that I came up with based on watching his video:

-You are at the whims of YouTube and their algorithms. What works one day may change if YouTube changes how they run things.
-Keep putting out consistent good content. Some will bring you money and some won’t.
-Just because you have subscribers doesn’t mean they watch the videos. Most watchers find Beyond the Brick through YouTube’s recommended videos.
-Ads increase right before Christmas. Can you guess why?
-Your revenue will fluctuate. It’s good to have other sources of revenue. Beyond the Brick has regular sponsors. This year it is Brickmania. Last year it was BrickLink. They also sell merchandise and use affiliate marketing.
-Your expenses can get high so be ready.
-They pay a lot in taxes. From experience, my NLS had a business and having a good CPA really helped us as the CPA gave us some good tips for how to lower our taxes. Definitely keep it in mind if you are going to get serious about a brick business (my opinion anyway).

One more useful video if you’re looking to start a Brick YouTube Channel. Boone Langston is a newer member of the Beyond the Brick team and in this video he interviews Jang of Jangbricks for over an hour. If you don’t know Jang, he has been running a YouTube channel for quite some time and has amassed over a million subscribers. Jang goes into the origins of his work and some of the things he has done over the years. I have yet to write a post on Jang, but he is known for providing video reviews of just about every set out there. The video is rather long and I will admit that there were some parts I skipped over, but there is some really good advice as well. Here are a few lessons learned I pulled away from the video:

-Take the time to make sure you are producing quality material. That includes the right lighting, sound equipment, and video equipment. I will fully admit that my pictures on this site need a lot of work.
-Respond to your fans. Answer questions they post.
-Monitor comments and make sure they are in line with your standards. Jang wants to be family friendly and he is quick to remove posts where people are offensive.
-Get feedback from your viewers and try to make changes based on what they want.
-If you are going to review every set, figure out what to do with your sets when you are done. There is no need to collect everything and be a hoarder.
-Your channel is not going to be super successful over night. It’s an evolutionary process to become popular.
-Having a dog in the video is a good distraction for the boring parts

So there you have it. I hope they were helpful. If you can think of any more useful videos on setting up a YouTube channel or more specifically a brick based YouTube channel, post them in the comments.

Happy building!