Set Review - #80107-1: Spring Lantern Festival - Chinese Traditional Festivals

I finally finished building and taking pictures of the second 2021 Chinese Traditional Festival set. This one is #80107-1: Spring Lantern Festival. The first one was #80106-1: Story of Nian in case you missed my review. This one was also released on 11 January 2021 in the US. It retails for $119.99 and contains 1,793 pieces. This works out to $0.067 per piece.

This set sold out very quickly on Shop @ Home and shows on backorder at the time I’m writing up this post. I found it here locally at one of the few stores deemed “essential” to be open during Germany’s winter lockdown. As an added bonus, the set was on sale for $99.95. $20 off a brand new, hard to find set. Done! I grabbed the last one off the shelf.

Onto the review… the box is similar to #80106-1. The front shows the whole set, highlights the minifigures on the bottom right, has a drawing of an ox in the upper right for the “Year of the Ox,” and has the Chinese Traditional Festivals logo on it. It highlights in the lower left that this set contains a light brick. The back of the box shows off some play features and details. This set is built similar to the modular buildings in that it has Technic pins to connect it to itself or other buildings. This is a nice addition we have yet to see in other sets.

80107_box_front.jpg
80107_box_back.jpg

The set contains 15 numbered parts bags numbered one through eleven. There are two dark grey base plates. One is 32x32 and the other is 16x32. You also get a sealed instruction book (actually two) and some plastic streamers. Like set #80106-1, there is a two page spread in the instruction booklet with a cartoon showing the spring lantern festival.

contents.jpg
streamers.jpg

The streamers I mentioned are here. They have Chinese writing on them which I have no idea what it translates to. Hopefully LEGO got it done right and it’s not making fun of us. The streamers are a thin plastic, but not too flimsy. I don’t recall seeing this type of thing in a set before. Usually it is the cloth like pieces that become minifigure capes. Have these appeared before?


Before I begin, I didn’t picture it, but you get a piece separator with this set. Bag one starts with the 32x32 plate. You build up an outer sidewalk and then start to lay in the outer base of the festival area. Lots of bricks to include 2x6s. Bag one contains a male minifigure with a spoon, bowl, and a 1x1 round tile with printed food. I didn’t picture him until bag two (sorry).

80107_build1.jpg

The second bag continues with the base. It lays in where the pond area is located and some of the walkway. Like many sets, LEGO used different colored parts to help you with the build. You don’t actually see them later on so if you want those pieces or colors, you can easily swap them out from your parts stash to use them elsewhere. Bag two has a female minifigure holding a smart phone 1x2 tile. She is pictured along with the minifigure from bag one.

80107_build2.jpg

The third bag adds in the pond with a lot of 1x2 translucent blue tiles. I wasn’t sure I would like the finished product, but I think the tiles over the dark green plates work as a pond. Some of the tiles have printed koi fish on them with which helps to add to the scene. I’m a fan!

80107_build3.jpg

Next up, you continue to build out around the pond adding some green plates for grass. You also add in a few light gray pieces to be used later and then build up a round stand for your brick built ox to stand on. The brick built ox is mostly red with some gold. It fits in well with the box art and the head is on a ball and joint so you can turn it as desired. The light brick is used here and you push the ox’s rear to light it up. Then it looks red.

Two minifigures in this bag. A male and a female with matching 2021 shirts. The male has a cup with a straw and the female has a selfie stick and 1x2 tile smart phone. Not the first time we’ve seen a selfie stick, but the first time I’ve seen a cup with a straw. The straw is one of the poseable minifigure pieces that I think I first saw with the collectible minifigures. Maybe in #71026: DC Super Heroes?

80107_build4.jpg

The fifth bag adds the sidewalk over all of the colorful pieces you spent time laying down and a bridge over the pond. It also adds part of the fence around the festival area. The bridge is pretty simple, but has some good aesthetics to it with the curves and light grey round pieces. The sidewalk isn’t just studs or tiles. It is a mix of studs, a few tiles, and some modified tiles. I think my preference would be to have fewer studs showing and more of the modified tiles. I guess I can do that myself instead of complaining about it…

80107_build5.jpg

Next up, we add some plant life in the form of bamboo type plants in the corner and them some lily pad type plants on the pond. You also get some lanterns hanging from posts behind the ox. There are two 2x2 tiles with more calligraphy on them. The streamers are added in this part of the build on poles on the fence. I assume the thought is these would be blowing in the breeze so you could actually see the one behind the other. Back to the brick built world, you put one streamer in front of the other and can’t see it unless you move it with your fingers. I guess it doesn’t matter since I have no idea what they say anyways.

This bag comes with a minifigure. It’s a boy with a scarf on and he is carrying a lantern on a pole similar to the cartoon in the front of the instruction book.

80107_build6.jpg

As for the seventh bag, I have failed you as a reviewer. I finished the step, but didn’t take a picture of it. Don’t fear though as you will see the completed set at the end which includes the last part of the build on the 32x32 plate. This build adds the wall around part of the festival area with the entrance. It also adds a small tree.

I apologize for missing this step.


Back to the review… Bag eight starts the build on the 16x32 base plate. Much like the last one, it builds the base and a sidewalk on part of it. This one has Technic pins so you can connect it to the other base plate.

This bag comes with a male minifigure with a camera.

80107_build7.jpg

The ninth bag starts to build up the… um… is it a temple? a gazebo? a hut? Anyways, you build up a base and then start to build the supports to connect the roof to the base of the small shrine like area.

This bag includes a girl minifigure. She has a toy rabbit on wheels as pictured in the cartoon in the front of the first instruction book.

80107_build8.jpg

The tenth bag puts the dark blue roof on the hut structure. The design is pretty intricate with some great piece usage. I like the dark blue colors and the way the angles make it rounded. The dark blue banana pieces are the key for me. #80106-1 had teal blue colored banana pieces. This one also has a 2x4 tile with printed calligraphy on it. Again, I’m not sure what it says.

80107_build10.jpg

#11 finishes up the build with some extra details. You get plant life, some lanterns strung on string between poles, the wall with a portal to enter the space, a lamp with some lanterns on it, and then a red minifigure statue.

80107_build11.jpg

Here’s the final picture of the set assembled. I’ll be honest and say that I wasn’t completely won over by this set. The build was just okay. Nothing overly complicated, but some good piece usage. There are some good pieces for MOC builders and the minifigures are good. Maybe it’s the price and then what you get at the end. $120 for a park scene? I realize the number of pieces involved and some of the cool pieces used, but this one just didn’t do it for me. Maybe I would have to put it together with a city scene or something in order to get the full effect.

What are your thoughts? Am I out to lunch or right in line with my opinion on this set?

Happy building!

80107_final2.jpg