Set Review - #10267-1: Gingerbread House - Creator Expert - Winter Village

LEGO has a few lines where they repeat the theme at specific times each year. The Winter Village is one of those themes with 2019’s set being released on 1 October 2019. #10267-1: Gingerbread House retails for $99.99 in the US. It contains 1,247 pieces which works out to be $0.068/piece. As of late, LEGO has been discounting these sets at their end of life time period which is usually after 3 years (but not always). You can look for deals at other retailers too so be on the lookout!

Here’s the box. The front of the box shows the full set while the back of the box shows the back of the set and some of the play features. The box also notes that you get a light brick with the set which seems to be pretty standard for the Winter Village buildings.

10267_box_front.jpg
10267_box_back.jpg

The contents are 10 parts bags. The bags are labeled 1 though 5 and there are 2 bags each. You also get a 16x16 white plate. Additionally, there is a sealed package with the instructions and a small sticker sheet. The instructions contain 2 booklets. The first is for the first set of bags and includes everything not attached to the gingerbread house. The second is the build for the house.

I was glad to see a small sticker sheet with only 3 stickers on it. The stickers were also decent sized so I’m glad I didn’t have to put stickers on 1x1 or 1x2 tiles. This set gets the detail by using bricks and printing. Yay!

10267_contents.jpg
10267_instructions.jpg

The first 2 bags build everything not connected to the house. There is a small Christmas tree which has some similarities to last year’s set (#10263-1: Winter Village Fire Station). I like the star on top and the piece they used to create it is pretty cool. I’m not sure if it is new or not, but I hope to see it again.

The two minifigures are in this bag too. From what I recall, the gingerbread man first appeared back in the Series 11 Collectible Minifigures set. Is that from 2013? Now we get two different versions. The male version has a mustache and the female has a skirt on. There is also a 1x2 tile for the baby. Along with the baby is a bottle about the size of the baby and you build a small carriage with cookie wheels to push the baby around in.

There is a snow blower which is cleverly designed and it looks like it could be candy made.

10267_build1.jpg

The second set of bags starts the actual gingerbread house. The floor has some great tiling work. I’m also a big fan of the translucent, sparkled 1x1 bricks for the windows. I always like the 1x2 or 1x4 bricks with the brick texture on them. No complaints thus far in the build.

10267_build2a.jpg
10267_build2b.jpg

The third set of bags finishes up the first floor of the house. The fireplace reaches through the front of the house and into the first floor. I’m not sure I’m a fan of this, but I’m guessing it is so you can show the light brick on the inside and the outside. The inside has some good details to include a little kitchen, some furniture, and some decorations. Given the small space, I think the designers did a good job at making sure it was detailed without going overkill on details.

10267_build3a.jpg
10267_build3b.jpg

The fourth set of bags builds up the second floor. The use of white tiles and bricks to make the roofs look frosted is cool along with the 1x1 round tiles to make is seem like there are candies as well. You can see the bathtub and the start of the bathroom on the interior of the second floor in this bag too.

10267_build4a.jpg
10267_build4b.jpg

The fifth set of bags finishes off the house. The roof is completed and the upstairs details are completed. I’m a fan of the multiple slopes on the roof versus just one slope. The use of many angles makes it look more like a house.

The interior details include a lamp, a bed, the crib, the rest of the bathroom, and the toilet. Again, great use of parts to maintain the candy feel while adding details.

10267_build5a.jpg
10267_build5b.jpg

Here’s the final picture with everything from the set. Overall, I like this set and I think it was worth the price they set on it. It was a good build with some interesting techniques and some great pieces. The minifigures are fun and this set fits well within the Winter Village sub-theme.

Downsides to the set… I would prefer the full building versus just a half. I realize it would drive up the price or cut down on the detailing, but the builds limit how you can display the sets. Everything has to face one direction or you have to build your thoughts for the rest of the set on your own.

If you’re a fan of the Winter Village sub-theme, I recommend picking this set up. Look for opportunities to get it on sale or to get double VIP points or other bonuses if it is not on sale.

Happy building!

10267_final.jpg